HomeLog in
Latest topics
Who is online?
In total there are 2 users online :: 0 Registered, 0 Hidden and 2 Guests None
Most users ever online was 275 on 8/4/2021, 5:19 am
mems 3 16v head, mems 1.9..
Page 1 of 1
mems 3 16v head, mems 1.9..
Matt Parker 18/12/2012, 8:03 am
I have a 16v cylinder head for mems 3(2001 onwards) auto tensioner, the inlet cam has been retro fitted with the spigot peg for rotor arm for distributor fitment of mems 1.9 (1996-2000) (can be removed or I cam fit a standard mems 3 camshaft)
Head was reconditioned about 200 miles ago with a skim, pressure test etc
£80 collected, can bring to a meet to save traveling and postage.
also if anyone is interested I have a 1.4 16v bottom end in good condition, pistons with both 8v and 16v cut outs, still fitted in my metro atm, offers.
Head was reconditioned about 200 miles ago with a skim, pressure test etc
£80 collected, can bring to a meet to save traveling and postage.
also if anyone is interested I have a 1.4 16v bottom end in good condition, pistons with both 8v and 16v cut outs, still fitted in my metro atm, offers.
Matt Parker- Registered user
Similar topics» what to do on the head
» VVC cylinder head
» VVC head work
» Help head lights
» I don't think its a head gasket but....
» VVC cylinder head
» VVC head work
» Help head lights
» I don't think its a head gasket but....
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|
» Adrian Flux - Roadhalo
» Adrian Flux August Competition
» Adrian Flux Spring Forum Competition
» 2016 MG Spring Meeting in the Dolomites
» Adrian Flux - Christmas 2015 Opening Hours
» Sywell Pistons and Props - Details?
» Autumn Weekender - September 12th & 13th 2015
» MGF20 - Anybody going?
» October 2015 - Invitation to Mg’rs based in UK to join us in South Tyrol