Log in
Latest topics
Who is online?
In total there are 2 users online :: 0 Registered, 0 Hidden and 2 Guests None
Most users ever online was 275 on 8/4/2021, 5:19 am
Clutch cylinder replacement
3 posters
Page 1 of 1
Clutch cylinder replacement
Need to replace this on frasers f, ideally before next Saturday
Matt advises we need a pressure bleeder to do this, any one have one we can borrow?
Also any help gtatefully received
Andy & Hells
Matt advises we need a pressure bleeder to do this, any one have one we can borrow?
Also any help gtatefully received
Andy & Hells
Re: Clutch cylinder replacement
I bleed mine without a pressure bleeder, but by god it takes ages to do, takes about 30 minutes, and you have to be focused, Ie someone pumps the clutch while you bleed, if you value your sanity, the pressure bleeder thing is good, I think you can get them that run off the spare tyre etc.
Sambomonkee- Registered user
Re: Clutch cylinder replacement
Mmmmmmmm. Don't think Russell used one when he did hellens and that took nigh on an hour, might just have to do it that way ... Good exercise fr whoever a pumping lol
Re: Clutch cylinder replacement
If your able to bleed the clutch without a pressure bleeder then your lucky as the air gets trapped in the system if you just try to bleed by pumping the pedal.
Th pressure bleeder kit attaches onto a tyre valve and once on it takes less then 1 minute to bleed the system fully giving you a nice firm pedal
Th pressure bleeder kit attaches onto a tyre valve and once on it takes less then 1 minute to bleed the system fully giving you a nice firm pedal
Matt Parker- Registered user
Similar topics
» Clutch Slave or master cylinder??
» VVC cylinder head
» mg tf stat replacement
» AP Racing Clutch
» Selling My ZS
» VVC cylinder head
» mg tf stat replacement
» AP Racing Clutch
» Selling My ZS
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
12/1/2017, 8:16 pm by chrisco59
» Adrian Flux - Roadhalo
7/1/2017, 1:56 am by DAN@ADRIAN FLUX
» Adrian Flux August Competition
16/9/2016, 10:16 pm by DAN@ADRIAN FLUX
» Adrian Flux Spring Forum Competition
1/4/2016, 7:52 pm by DAN@ADRIAN FLUX
» 2016 MG Spring Meeting in the Dolomites
20/1/2016, 8:46 pm by chrisco59
» Adrian Flux - Christmas 2015 Opening Hours
8/12/2015, 8:20 pm by DAN@ADRIAN FLUX
» Sywell Pistons and Props - Details?
21/9/2015, 12:17 am by StevePem
» Autumn Weekender - September 12th & 13th 2015
25/8/2015, 3:22 am by Rich
» MGF20 - Anybody going?
25/7/2015, 3:24 am by StevePem
» October 2015 - Invitation to Mg’rs based in UK to join us in South Tyrol
11/7/2015, 7:46 am by chrisco59