Boost Gauge

[Sambomonkee]

Anyone got a boost gauge I could borrow or buy (cheaply ), as I want to up the PSI on the ZR but don't want to be guessing.

[cejsmith]

Anyone got a boost gauge I could borrow or buy (cheaply ), as I want to up the PSI on the ZR but don't want to be guessing.

Just guess, you know when you have gone to far when the huge plume of black smoke goes out the back and the pistons stick out the side of the block

[Matt Parker]

I have one for my ZS that is not in use atm that you can test/borrow if you like.

[Sambomonkee]

Thanks, but first I am going to do it the teccy way with a multimeter, I have a table of voltages to psi, if that doesnt work I will take you up on your offer

[Matt Parker]

No problem.

[Sambomonkee]

Here is my geeky boost gauge, worked a treat, running around 19psi max (did not want to push my luck), I did a couple of 0-62 on a private road, and averaged 7.5 seconds .

This is for a diesel, I reckon it will out pull the F in normal driving (ie not sprint starts) when the F would then pull ahead, when on boost it is quite a feeling with all that torque.

[Matt Parker]

I didn't scrole down the page to see the full picture so all i saw was the clock which made me think how the hell have you got a reading going into a clock

Nice job anyway

[Sponsored content]