Log in
Latest topics
Who is online?
In total there are 2 users online :: 0 Registered, 0 Hidden and 2 Guests None
Most users ever online was 275 on 8/4/2021, 5:19 am
roof seals
4 posters
roof seals
I'm gettting abit of a problem with the door windows not sealing with the roof properly. This is leading to little dribbles coming in the cabin.
Does anyone know of anybody thats good at sorting that sort of thing out??????
Does anyone know of anybody thats good at sorting that sort of thing out??????
cejsmith- Registered user
Re: roof seals
Hi Ckolin,I believe Dave Dunlop had his windows adjusted on the trophy by a local firm worth dropping Dave a PM I've tried adjusting mine but never get it right I think paying an expert is the way forward...
Nick- Admin/Moderator
Re: roof seals
Yes, there is definitely a knack to doing it. I spent so long trying to get mine right, I drained the battery from opening and closing the windows so many times and still did not get it right. MGF Centre quoted me (up to) £47 per door and it is a bit of a treck over there, would be good to find someone local.
StevePem- Registered user
Re: roof seals
If your seals are ok and not collapsed then you just need to adjust(tweak) the angle of the window, takes me just afew mins but thats because I've done them afew times so i know what needs doing where
Does your window sit flush with the mirror cheetah when done up(with door open) or does it stick past? You may need to adjust the stops(or replace if badly worn/broken) and then adjust the guides and rear stop bracket.
Does your window sit flush with the mirror cheetah when done up(with door open) or does it stick past? You may need to adjust the stops(or replace if badly worn/broken) and then adjust the guides and rear stop bracket.
Matt Parker- Registered user
Re: roof seals
I assume I'm not the only person with this problem, anybody fancy getting together to help each other sort it out????
cejsmith- Registered user
Re: roof seals
If I get chance I could have a look for you but no idea when as I have alot on at the momment, struggling to fit Rich's HGF in but think I'm managing that
Matt Parker- Registered user
Re: roof seals
Thanks Matt
If I don't get it sorted by next meeting , perhaps you can look then.
If I don't get it sorted by next meeting , perhaps you can look then.
cejsmith- Registered user
Re: roof seals
Hi Matt,
Perhaps you could run a "window alignment clinic" when you can fit it in, I bet others have similar problems.
My passenger side window is not too bad other than it needs the stops adjusting again so will probably have another go at that myself when we have a nice weekend. The drivers side I just can't seem to get lined up properly and now the window is also loose and rattles so I think something has become disconnected or at least worked loose. The rear edge in particular does not tuck into the rubber seal to the same degree that the passenger side does no matter what adjustments I try. Maybe it is the hood that needs adjusting?
Again, I will have another go and see if I can get it better, as I said in the last post, I drained the battery last time I tried and I just put the door back together, recharged the battery and left it.
Cheers
Steve
Perhaps you could run a "window alignment clinic" when you can fit it in, I bet others have similar problems.
My passenger side window is not too bad other than it needs the stops adjusting again so will probably have another go at that myself when we have a nice weekend. The drivers side I just can't seem to get lined up properly and now the window is also loose and rattles so I think something has become disconnected or at least worked loose. The rear edge in particular does not tuck into the rubber seal to the same degree that the passenger side does no matter what adjustments I try. Maybe it is the hood that needs adjusting?
Again, I will have another go and see if I can get it better, as I said in the last post, I drained the battery last time I tried and I just put the door back together, recharged the battery and left it.
Cheers
Steve
StevePem- Registered user
Re: roof seals
no problems Colin, if you let me know in advance before the meet if you want me to have a look so I can try and remember my tools
lol, I can do alot more than simple window alignment and everyone keeps telling me to set up my own business but its not that simple so have to wait
If the glass is sticking out/up more at the rear then the first thing you need to check is if the glass if going up too far, way to check this is if you look at the bottom rear of the glass you have the 'MG' and 'SRS' symbols, these should be nice and level(parallel) with the top edge of the door and most likely you will have these on a slight angle being higher at the rear. If so then you need to start adjustment by lowering the stop and the reg at the back first, then fiddle with the fronts to get the angle you require.
lol, I can do alot more than simple window alignment and everyone keeps telling me to set up my own business but its not that simple so have to wait
If the glass is sticking out/up more at the rear then the first thing you need to check is if the glass if going up too far, way to check this is if you look at the bottom rear of the glass you have the 'MG' and 'SRS' symbols, these should be nice and level(parallel) with the top edge of the door and most likely you will have these on a slight angle being higher at the rear. If so then you need to start adjustment by lowering the stop and the reg at the back first, then fiddle with the fronts to get the angle you require.
Matt Parker- Registered user
Similar topics
» what colour roof??
» roof with glass rear screen
» One for Matt Cam Seals
» AP 4-pots, refurbishing / seals.
» roof with glass rear screen
» One for Matt Cam Seals
» AP 4-pots, refurbishing / seals.
Permissions in this forum:
You cannot reply to topics in this forum
|
|
12/1/2017, 8:16 pm by chrisco59
» Adrian Flux - Roadhalo
7/1/2017, 1:56 am by DAN@ADRIAN FLUX
» Adrian Flux August Competition
16/9/2016, 10:16 pm by DAN@ADRIAN FLUX
» Adrian Flux Spring Forum Competition
1/4/2016, 7:52 pm by DAN@ADRIAN FLUX
» 2016 MG Spring Meeting in the Dolomites
20/1/2016, 8:46 pm by chrisco59
» Adrian Flux - Christmas 2015 Opening Hours
8/12/2015, 8:20 pm by DAN@ADRIAN FLUX
» Sywell Pistons and Props - Details?
21/9/2015, 12:17 am by StevePem
» Autumn Weekender - September 12th & 13th 2015
25/8/2015, 3:22 am by Rich
» MGF20 - Anybody going?
25/7/2015, 3:24 am by StevePem
» October 2015 - Invitation to Mg’rs based in UK to join us in South Tyrol
11/7/2015, 7:46 am by chrisco59