Log in
Latest topics
Who is online?
In total there is 1 user online :: 0 Registered, 0 Hidden and 1 Guest None
Most users ever online was 275 on 8/4/2021, 5:19 am
Hoses
5 posters
Hoses
I'm getting cross with the hoses hanging round in a box under my table!
How difficult are they to fit, and would I be biting off more than I can chew to have a crack at doing it myself?
How difficult are they to fit, and would I be biting off more than I can chew to have a crack at doing it myself?
dressur- Registered user
Re: Hoses
i assume you mean coolant hoses!
Erm i think you should be able to manage it! its just filling the system that is the trickier part!
Erm i think you should be able to manage it! its just filling the system that is the trickier part!
Dark Knight- Registered user
Re: Hoses
Dark Knight wrote:i assume you mean coolant hoses!
Erm i think you should be able to manage it! its just filling the system that is the trickier part!
Thats the bit that worries me slightly!!
The last bodge job has started to fall apart- There was a wet patch on the ground this morning!!
dressur- Registered user
Re: Hoses
Even some supposedly 'expert' garages have problems with getting the cooling system right, so I would be tempted to get a reputable one to do it. There's not much point in doing half the job yourself as you won't be able to drive it anywhere to get it finished off for you. But the hose fitting isn't that complicated, so it shouldn't cost too much.
Rich
Rich
Re: Hoses
That is good advice Richard, Clifton Lane has some kind of special tool for the job. Getting all the air out is critical!
uk kiwis- Registered user
Re: Hoses
Ali...trust me dont do it unless you have the vacuum equipment to fill the system again. I did mine, bled the system drove round the corner and then saw the temperature gauage shoot up! ended up towing it to clifton lane to get it refilled!
Seb- Registered user
Permissions in this forum:
You cannot reply to topics in this forum
|
|
12/1/2017, 8:16 pm by chrisco59
» Adrian Flux - Roadhalo
7/1/2017, 1:56 am by DAN@ADRIAN FLUX
» Adrian Flux August Competition
16/9/2016, 10:16 pm by DAN@ADRIAN FLUX
» Adrian Flux Spring Forum Competition
1/4/2016, 7:52 pm by DAN@ADRIAN FLUX
» 2016 MG Spring Meeting in the Dolomites
20/1/2016, 8:46 pm by chrisco59
» Adrian Flux - Christmas 2015 Opening Hours
8/12/2015, 8:20 pm by DAN@ADRIAN FLUX
» Sywell Pistons and Props - Details?
21/9/2015, 12:17 am by StevePem
» Autumn Weekender - September 12th & 13th 2015
25/8/2015, 3:22 am by Rich
» MGF20 - Anybody going?
25/7/2015, 3:24 am by StevePem
» October 2015 - Invitation to Mg’rs based in UK to join us in South Tyrol
11/7/2015, 7:46 am by chrisco59