Log in
Latest topics
Who is online?
In total there are 2 users online :: 0 Registered, 0 Hidden and 2 Guests None
Most users ever online was 275 on 8/4/2021, 5:19 am
Will a Rover 200 gear knob fit a TF gear stick?
2 posters
Page 1 of 1
Will a Rover 200 gear knob fit a TF gear stick?
Anyone know the answer to the above? I know the gear knob fitting on my ZS was totally different to the TF
StevePem- Registered user
Re: Will a Rover 200 gear knob fit a TF gear stick?
They are both threaded knobs so depending on the depth of the knob where the shaft inserts it'll be a yes but may compress the gaitor alot or stick up too high. Trial and error.
Matt Parker- Registered user
Re: Will a Rover 200 gear knob fit a TF gear stick?
Thanks Matt
I was not sure if the threads were the same diameter/profile. I can't see that it would sit any lower down the gear stick than the standard TF knob so should not compress the gaiter. I have a small round "universal fit" one on now and the gaiter is fine with that.
Cheers
Steve
I was not sure if the threads were the same diameter/profile. I can't see that it would sit any lower down the gear stick than the standard TF knob so should not compress the gaiter. I have a small round "universal fit" one on now and the gaiter is fine with that.
Cheers
Steve
StevePem- Registered user
Similar topics
» Fixed wobly gear stick!
» Gear Knob Free to a Good Home
» Wanted: Rover 25 / MG ZR heater knob
» Only rover would do this..
» Rover 211
» Gear Knob Free to a Good Home
» Wanted: Rover 25 / MG ZR heater knob
» Only rover would do this..
» Rover 211
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
12/1/2017, 8:16 pm by chrisco59
» Adrian Flux - Roadhalo
7/1/2017, 1:56 am by DAN@ADRIAN FLUX
» Adrian Flux August Competition
16/9/2016, 10:16 pm by DAN@ADRIAN FLUX
» Adrian Flux Spring Forum Competition
1/4/2016, 7:52 pm by DAN@ADRIAN FLUX
» 2016 MG Spring Meeting in the Dolomites
20/1/2016, 8:46 pm by chrisco59
» Adrian Flux - Christmas 2015 Opening Hours
8/12/2015, 8:20 pm by DAN@ADRIAN FLUX
» Sywell Pistons and Props - Details?
21/9/2015, 12:17 am by StevePem
» Autumn Weekender - September 12th & 13th 2015
25/8/2015, 3:22 am by Rich
» MGF20 - Anybody going?
25/7/2015, 3:24 am by StevePem
» October 2015 - Invitation to Mg’rs based in UK to join us in South Tyrol
11/7/2015, 7:46 am by chrisco59