Log in
Latest topics
Who is online?
In total there are 3 users online :: 0 Registered, 0 Hidden and 3 Guests None
Most users ever online was 275 on 8/4/2021, 5:19 am
cant undo the upper ball joint nut
3 posters
cant undo the upper ball joint nut
I need to get to the upper ball joint dust cover and replace it ( it failed the mot on it) and I'm trying to undo the 19mm nut that holds it in place. It started to undo but now it's just spinning.
What should I do???
What should I do???
cejsmith- Registered user
Re: cant undo the upper ball joint nut
Is there not a slot in the top of the ball joint thread which accepts an allen key to counter hold it?
Failing that, use a jack to jack up the lower suspension arm so it simulates the car's weight on the ball joint, that will stop it spinning in the manner you describe.
Failing that, use a jack to jack up the lower suspension arm so it simulates the car's weight on the ball joint, that will stop it spinning in the manner you describe.
Captain Slow- Registered user
Re: cant undo the upper ball joint nut
Cut it off? My solution to everything, grinder or hammer
Sambomonkee- Registered user
Re: cant undo the upper ball joint nut
Thanks now it's stop raining I will try to sort it. If though I cant just replace the dust cover what size socket do I need to remover the ball joint???
cejsmith- Registered user
Re: cant undo the upper ball joint nut
We it's all sort now and the TF is now re moted, in the end when I cleaned the dust cover it was fine and the MOT testers agreed so I didn't need to replace the ball joint in the end. So if anybody needs one give me a shout!!!
cejsmith- Registered user
Permissions in this forum:
You cannot reply to topics in this forum
|
|
12/1/2017, 8:16 pm by chrisco59
» Adrian Flux - Roadhalo
7/1/2017, 1:56 am by DAN@ADRIAN FLUX
» Adrian Flux August Competition
16/9/2016, 10:16 pm by DAN@ADRIAN FLUX
» Adrian Flux Spring Forum Competition
1/4/2016, 7:52 pm by DAN@ADRIAN FLUX
» 2016 MG Spring Meeting in the Dolomites
20/1/2016, 8:46 pm by chrisco59
» Adrian Flux - Christmas 2015 Opening Hours
8/12/2015, 8:20 pm by DAN@ADRIAN FLUX
» Sywell Pistons and Props - Details?
21/9/2015, 12:17 am by StevePem
» Autumn Weekender - September 12th & 13th 2015
25/8/2015, 3:22 am by Rich
» MGF20 - Anybody going?
25/7/2015, 3:24 am by StevePem
» October 2015 - Invitation to Mg’rs based in UK to join us in South Tyrol
11/7/2015, 7:46 am by chrisco59