Re: Exhaust fitment

**Matt Parker** 15/8/2011, 5:25 am

Two ways to fit it, the first is to fit an MGF(mk1) Cat or de-cat pipe so the exhaust can bolt straight on, then you just disconnect the secondary lambda sensor. The second way which would be best is to have the bend pipe of the new exhaust cut(wheres the seam join is on the centre of the straight) and the flange welded on so it can bolt straight to your cat.

**cejsmith** 15/8/2011, 5:31 am

Matt

What would you do mate, play with this exhaust or sell it and get a TF one???

Also got any idea of the cost of sorting it out the second way?

**Matt Parker** 15/8/2011, 5:39 am

If I liked the exhaust and got it for a good price then I would make it fit, as I always do, recently bought another ZR160 Janspeed 4-2-1 along with a matching sports-cat that I wil be fitting to my new Metro.

I would cut and weld it for you for £30 but wont be able to for atleast a month. At a garage it shouldn't be more than an hr's labour to do it.

btw, think you have to cut the openings in the bumper out more for that exhaust, measure the width of the pipes and the hole in the bumper.

**Nick** 15/8/2011, 8:32 am

That a Milltek you've got there Col, excellent Smile

**cejsmith** 15/8/2011, 6:56 pm

I was sold it as a Scorpion so I suppose it's not a bad deal anyway. Who has a miltek I cant rember?

**Nick** 15/8/2011, 7:21 pm

Well MikeCVC has the same Milltek as youve got, apart from that I can't think of anyone else who has a bee in a biscuit tin exhaust? Laughing

I'm sure Neil Willets will tell you you should've got a mk 7000 TT once you show it On .org though Rolling Eyes

**cejsmith** 16/8/2011, 8:33 pm

I've jsut put a post up on .org to see if any one wants to to a deal on my exhaust for a TF one.

Any one here that might have a TF exhaust that looking for a F one????

**cejsmith** 17/8/2011, 4:52 am

Intresting that Neil of TT fame thinks that my exhaust is quite rare and I dhould sell it, perhaps to buy a TT what do you think Wink

**gotenks1321** 17/8/2011, 4:59 am

Lee's got a quad Miltek too Headbanger

Mine is the 3" single each side but they're a lot more common....should've bought a TT Rolling Eyes

**cejsmith** 17/8/2011, 7:07 am

gotenks1321 wrote:Lee's got a quad Miltek too Mine is the 3" single each side but they're a lot more common....should've bought a TT

True there is only one exhaust thats the TT it could almost have been made by Carlsberg Suspect

**Matt Parker** 20/8/2011, 1:09 am

Just found this on ebay Rolling Eyes

http://www.ebay.co.uk/itm/MGF-TF-Milltek-quad-pipe-exhaust-/230662200447?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35b489dc7f#ht_500wt_949

StevePem 20/8/2011, 1:26 am

cejsmith wrote:Intresting that Neil of TT fame thinks that my exhaust is quite rare and I dhould sell it, perhaps to buy a TT what do you think

Could sell you one for the right price if you are interested Laughing

**cejsmith** 20/8/2011, 4:31 am

Matt Parker wrote:Just found this on ebay

http://www.ebay.co.uk/itm/MGF-TF-Milltek-quad-pipe-exhaust-/230662200447?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35b489dc7f#ht_500wt_949

Thats mine!!!

**Matt Parker** 20/8/2011, 9:17 pm

I know, the ebay user name gave it away Laughing

**cejsmith** 21/8/2011, 4:02 am

It's gone now!!!

Sponsored content