Log in
Latest topics
Who is online?
In total there are 3 users online :: 0 Registered, 0 Hidden and 3 Guests None
Most users ever online was 275 on 8/4/2021, 5:19 am
exhaust finishers/tips
4 posters
Page 1 of 1
exhaust finishers/tips
I'm having problems sourcing a finishers long enough for the back box I brought of Dan. Any ideas, most seem to be around 150mm I need at least 180mm.
cejsmith- Registered user
Re: exhaust finishers/tips
Pop down to your local exhaust fabricator like Powerflow, Custom Chrome etc as they will have a selection of tailpipes to choose from and can make them to the length and bore you require. There is an old exhaust specialist near me that's still going 'Phil Brad ltd' thats on one of the old industrial sites so go for a little drive and see who you can find
Matt Parker- Registered user
Re: exhaust finishers/tips
The powerflow dealer in Aylesbury (Topgear Racing) have always been good for me in the past. They put the twin system on my ZS and the one on Dawns ZR. Had no problems with either.
Tony- Registered user
Re: exhaust finishers/tips
Tony wrote:The powerflow dealer in Aylesbury (Topgear Racing) have always been good for me in the past. They put the twin system on my ZS and the one on Dawns ZR. Had no problems with either.
Just spoken to them , they are looking for between £46 and £138 per side to put finishers on , which is strange becuase a complete new box would only cost £398.
What should I do!!!!
cejsmith- Registered user
Re: exhaust finishers/tips
How far in are the pipes? Have you looked at basic bolt on finishers to see what there is, as this will work just fine.
If you haven't sorted anything by the next meet we can have a chat and I will see what I can do for you
If you haven't sorted anything by the next meet we can have a chat and I will see what I can do for you
Matt Parker- Registered user
Re: exhaust finishers/tips
Matt Parker wrote:How far in are the pipes? Have you looked at basic bolt on finishers to see what there is, as this will work just fine.
If you haven't sorted anything by the next meet we can have a chat and I will see what I can do for you
Thanks Matt
The normal bolt on finishers just dont seems to be long enough , most top out a 6" I need getting on for 8/9".
cejsmith- Registered user
Re: exhaust finishers/tips
I thought it was a Daytona you bought? If so, won't Daytona finishers fit?
StevePem- Registered user
Re: exhaust finishers/tips
StevePem wrote:I thought it was a Daytona you bought? If so, won't Daytona finishers fit?
If only life was that simple, it turned out not to be a daytona and no one quite knows what it is!!!
cejsmith- Registered user
Re: exhaust finishers/tips
StevePem wrote:OR
but only if some of the wonderful ladys from the show come to help, I always had trouble with the double sided sticky backed plastic
cejsmith- Registered user
Re: exhaust finishers/tips
What diameter is the backbox pipe? here are a few random ones I found (not that I am bored at work )
may be worth putting something cheap and cheerful on till you can source something better.
http://www.ebay.co.uk/itm/SPORTY-7-INCH-CHROME-TAIL-PIPE-FITS-MOST-CARS-UNIVERSAL-/380369510250?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item588fca1f6a
http://www.ebay.co.uk/itm/UNIVERSAL-CHROME-EXHAUST-TAIL-PIPE-TRIM-CURVED-70MM-/120453087975?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c0b9042e7
http://www.ebay.co.uk/itm/Universal-Chrome-Exhaust-Tailpipe-Trim-Fits-upto-51mm-/360386382014?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53e8b3c8be
http://www.ebay.co.uk/itm/Universal-Curled-Down-Exhaust-Tail-Pipe-Trim-64mm-2-5-/220575330956?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item335b50728c
http://www.ebay.co.uk/itm/Universal-3-Exhaust-Twin-Tail-Pipe-Stainless-Steel-/260828679775?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cba99ce5f
http://www.ebay.co.uk/itm/STAINLESS-STEEL-UNIVERSAL-EXHAUST-TAIL-PIPE-TRIM-61mm-/400128386204?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d2982a49c
may be worth putting something cheap and cheerful on till you can source something better.
http://www.ebay.co.uk/itm/SPORTY-7-INCH-CHROME-TAIL-PIPE-FITS-MOST-CARS-UNIVERSAL-/380369510250?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item588fca1f6a
http://www.ebay.co.uk/itm/UNIVERSAL-CHROME-EXHAUST-TAIL-PIPE-TRIM-CURVED-70MM-/120453087975?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c0b9042e7
http://www.ebay.co.uk/itm/Universal-Chrome-Exhaust-Tailpipe-Trim-Fits-upto-51mm-/360386382014?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53e8b3c8be
http://www.ebay.co.uk/itm/Universal-Curled-Down-Exhaust-Tail-Pipe-Trim-64mm-2-5-/220575330956?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item335b50728c
http://www.ebay.co.uk/itm/Universal-3-Exhaust-Twin-Tail-Pipe-Stainless-Steel-/260828679775?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cba99ce5f
http://www.ebay.co.uk/itm/STAINLESS-STEEL-UNIVERSAL-EXHAUST-TAIL-PIPE-TRIM-61mm-/400128386204?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d2982a49c
StevePem- Registered user
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
12/1/2017, 8:16 pm by chrisco59
» Adrian Flux - Roadhalo
7/1/2017, 1:56 am by DAN@ADRIAN FLUX
» Adrian Flux August Competition
16/9/2016, 10:16 pm by DAN@ADRIAN FLUX
» Adrian Flux Spring Forum Competition
1/4/2016, 7:52 pm by DAN@ADRIAN FLUX
» 2016 MG Spring Meeting in the Dolomites
20/1/2016, 8:46 pm by chrisco59
» Adrian Flux - Christmas 2015 Opening Hours
8/12/2015, 8:20 pm by DAN@ADRIAN FLUX
» Sywell Pistons and Props - Details?
21/9/2015, 12:17 am by StevePem
» Autumn Weekender - September 12th & 13th 2015
25/8/2015, 3:22 am by Rich
» MGF20 - Anybody going?
25/7/2015, 3:24 am by StevePem
» October 2015 - Invitation to Mg’rs based in UK to join us in South Tyrol
11/7/2015, 7:46 am by chrisco59