Log in
Latest topics
Who is online?
In total there is 1 user online :: 0 Registered, 0 Hidden and 1 Guest None
Most users ever online was 275 on 8/4/2021, 5:19 am
BB Motors In Corby
3 posters
Page 1 of 1
BB Motors In Corby
Thought I would put in a word for the garage that services my TF - BB Motors in Corby (Website here). Just had a full service plus Stainless Steel Coolant pipes fitted for under £340 which I think is pretty good.
This is the second annual service they have done for me and also they did a brake pipe for MoT for £85 when Souls wanted £190.
They are "old school" and small (3 people) but are genuine MGR (and know MGs) with all equipment and are an xpart dealer.
All in all a good bunch!
This is the second annual service they have done for me and also they did a brake pipe for MoT for £85 when Souls wanted £190.
They are "old school" and small (3 people) but are genuine MGR (and know MGs) with all equipment and are an xpart dealer.
All in all a good bunch!
StevePem- Registered user
Re: BB Motors In Corby
I was going to say that Corby was a bit far away for a service, especially from Olney, but then I thought about where I go for such jobs... and Matt is just a tad further...
Thanks for the details though. Next time you're up there, ask if thwy would be interested in doing any deals for club members and maybe a little promotion for us. Although we cover the whole of Northants, our membership seems to be all central and south of the county.
Rich
Thanks for the details though. Next time you're up there, ask if thwy would be interested in doing any deals for club members and maybe a little promotion for us. Although we cover the whole of Northants, our membership seems to be all central and south of the county.
Rich
Re: BB Motors In Corby
Yes, it is a bit of a trek but barring anything untoward hapenning with the car, it is only twice a year, once for annual service and once for MoT.
They have a loan car so I drive up there first thing in the morning, come back in the loaner and then go back first thing next day to collect mine.
It is better if I can work from home the day - it was a bit of a drag Olney to Corby then Corby to Milton Keynes two mornings in a row!
I just figure, once you have found a garage you trust, stick with them. The proprietor, Keith, really does know his stuff on Fs and TFs and I know they will never rip me off or cut corners. I think labour is c55 per hour which is quite competitive.
I will have a word with them regarding promoting SmS, even if it is just putting up a poster and having flyers on the counter. Will enquire on club discount too.
They have a loan car so I drive up there first thing in the morning, come back in the loaner and then go back first thing next day to collect mine.
It is better if I can work from home the day - it was a bit of a drag Olney to Corby then Corby to Milton Keynes two mornings in a row!
I just figure, once you have found a garage you trust, stick with them. The proprietor, Keith, really does know his stuff on Fs and TFs and I know they will never rip me off or cut corners. I think labour is c55 per hour which is quite competitive.
I will have a word with them regarding promoting SmS, even if it is just putting up a poster and having flyers on the counter. Will enquire on club discount too.
StevePem- Registered user
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
12/1/2017, 8:16 pm by chrisco59
» Adrian Flux - Roadhalo
7/1/2017, 1:56 am by DAN@ADRIAN FLUX
» Adrian Flux August Competition
16/9/2016, 10:16 pm by DAN@ADRIAN FLUX
» Adrian Flux Spring Forum Competition
1/4/2016, 7:52 pm by DAN@ADRIAN FLUX
» 2016 MG Spring Meeting in the Dolomites
20/1/2016, 8:46 pm by chrisco59
» Adrian Flux - Christmas 2015 Opening Hours
8/12/2015, 8:20 pm by DAN@ADRIAN FLUX
» Sywell Pistons and Props - Details?
21/9/2015, 12:17 am by StevePem
» Autumn Weekender - September 12th & 13th 2015
25/8/2015, 3:22 am by Rich
» MGF20 - Anybody going?
25/7/2015, 3:24 am by StevePem
» October 2015 - Invitation to Mg’rs based in UK to join us in South Tyrol
11/7/2015, 7:46 am by chrisco59